- Horsepower & torque gains maximized
- Inlcudes Apple & Android mobile flashing app
- Stock boost control optimized for all conditions
- 91, 93, & 104 pump octanes available (95, 98, & 108 RON)
- Optional TrueFlex adapts from 91 pump all the way to full E85
- Includes optional High Torque & Low Torque files
- Rev limiter increased to 7000 RPM (with DSG flash)
- Brake boosting enabled for rolling launches on all stages
- Launch control torque increased for faster launches
- Road speed limiters removed
- Exhaust Crackle feature available for Stage 2
- Engineered for all climates and elevations
- Direct port OBDII at-home flashing
- Easy octane switching takes only minutes
- Upgrade stages to match hardware upgrades
- Simple on/off feature toggling with POWERlink
- Read and clear diagnostic/problem codes
- Easy to use Data-logger
IE VW & Audi 2.0T Gen 3 IS20 MQB Performance Tune | Fits MK7/MK7.5 GTI, GLI, & 8V A3
Must Purchase Power Link Cable @ $179.99. If do not currently own one.
MK7 IS20 STAGE 1
IE Stage 1 ECU calibration dramatically increases performance leaving no hidden power on the table, and safely maxes out the factory IHI IS20 turbocharger's horsepower & torque capability. Engineered to operate on entirely stock hardware and compatible with basic bolt-ons (intake, turbo inlet, intercooler).
See the performance tab for power and dyno results
MK7 IS20 STAGE 2
IE Stage 2 software is for full bolt-on stock turbo builds running an aftermarket racing downpipe. IE calibrators use advanced tuning strategies to extract additional power and account for the increased flow from an upgraded downpipe and performance hardware. The required hardware upgrades for stage 2 will increase airflow, exhaust flow, lower intake air temps, provide faster IAT recovery, and produce an overall more efficient and faster vehicle on the stock IHI IS20 turbocharger. See below for a complete list of Stage 2 requirements.
Upgrading from Stage 1 to Stage 2 or beyond is easy! With IE, you only pay the difference in tune cost with no extra fees. When you install the required matching hardware, follow the instructions on your IE POWERlink app to purchase the tune upgrade, and you will be blowing away the competition in minutes!
HIGH/LOW TORQUE FILES
IE High Torque ECU calibrations maximize power gains throughout the entire powerband which quickly exceeds the torque limitations of the factory DSG calibration (auto trans) or the stock clutch (manual trans) that leads to clutch slipping. Stage 1 and Stage 2 files include optional Low Torque files for vehicles with stock DSG tune or stock clutch. Both high and low torque files are included and can be switched between as often as you like.
FEATURES & OPTIONS
E85 fuel unlocks the most performance potential from our ECU tunes for your GTI or A3 Gen 3 engine. Ethanol contains tons of oxygen, burns cooler, and has a high resistance to knock. This provides more horsepower and torque than running conventional gasoline and is more readily available (in most states) and less expensive than race gas. IE TrueFlex calibrations take this a step further and allow for 91 octane all the way up to full E85 or anything in between on one tune without the need to reflash! TrueFlex is an included option with all stages.
Click the TrueFlex tab above for full features and fitment restrictions
To take advantage of the new larger power band, factory rev limits have been raised to 7000RPM in all stages. On DSG equipped cars, the transmission will shift slightly before the new engine RPM (6900RPM).
DSG Tune is required to unlock higher RPM.
IE Exhaust Crackle feature adds an addicitng motorsport-inspired crackle sound to your exhaust note when you let off the accelerator or downshift above 3K RPM. This feature is active in Sport Mode or Sport Manual Mode so you can enjoy this feature when you want, and stay civil when you need it.
For the most aggressive pops and bangs an aftermarket catback system is recommended.
Brake Boosting provides a competitive edge in a roll racing scenario. While maintaining a constant speed and throttle position, apply brake pressure with the left foot to build boost at speed resulting in a rolling launch when brake pressure is released.
IE's fully proven software brings track-ready ECU programming to your EA888 Gen3 IS20 turbocharged 2.0T engine while retaining factory comfort and reliability. IE's own tuning technology suite is used to completely reverse-engineer the factory ECU mapping, allowing our software engineers access to realign all safety protocols and sensors for the new performance calibration. Every tune parameter undergoes months of testing on our in-house dyno systems that utilize the world's only Sea Level Generator developed specifically to verify tune operations in any condition. Confidently drive from LA to Pikes Peak with power that will keep you smiling every mile!